Symbols
Read the
operating
instructions
before use.
Disposal of
power tools or
appliances and
batteries
together with
household
waste is not
permissible.
Laser class II according
to CFR 21, § 1040 (FDA)
Laser class 2
according to
EN 60825-
3:2007
Location of identification data on the tool
The type designation and serial number can be found
on the type identification plate on the tool. Make a
note of this data in your operating instructions and
always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Serial no.:
2. Description
2.1 Use of the product as directed
The PMP 45 is a self-levelling point laser which allows a single person to level, plumb, align and transfer right
angles quickly and accurately. The tool features five coincident laser beams (beams that originate from the
same point). All beams have the same range of 30m (range depends on the brightness of ambient light).
The tool is designed for use mainly in interiors, for determining and checking vertical lines, alignment lines,
and for marking plumb points.
When used for outdoor applications, care must be taken to ensure that the general conditions are similar to
those encountered indoors. For example:
Marking the position of partition walls (at right angles and in the vertical plane).
Aligning components to be installed or sections of a structure in three axes.
Checking and transferring right angles.
Transferring measuring marks from the floor to the ceiling.
Modification of the tool is not permissible.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
2.2 Features
Highly accurate horizontal and vertical beams (±3 mm at 10 m).
Self-levelling to within ±5° in all directions.
Short self-levelling time: ~3 seconds
When the self-leveling range is exceeded, the laser beam blinks to warn the user.
The PMP 45 is characterized by its ease of operation and use, its rugged plastic casing and ease of transport
due to its compact dimensions and light weight.
When in normal operating mode, the tool switches itself off after 15 minutes. Sustained operating mode can
be selected by pressing the on/off button for four seconds.
en
12
(19 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals