Operating instructions enMode d’emploi frManual de instrucciones esSID/SIW14-A/18-A
Nationally applicable industrial safety regulations must be observed.2.2 The items supplied include (toolbox versions):1 Power tool1 Operating instruc
4. Technical dataRight of technical changes reserved.Power tool SID 14ತA SIW 14ತA SID 18ತA SIW 18ತARated voltage 14.4 V 14.4 V 21.6 V 21.6 VWeight (in
Power tool Position I Position II Position IIISID 18ತA 60 Nm (44 lb/ft) 110 Nm (81 lb/ft) 165 Nm (122 lb/ft)SIW 18ತA(u೩" squaredrive)75 Nm (55 l
a cord suitable for outdoor use reduces the riskof electric shock.f) If operating a power tool in a damp locationis unavoidable, use a residual curren
5.1.6 Servicea) Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of t
are free from foreign objects before insertingthe battery in the power tool. Short circuiting thebattery terminals presents a risk of fire, explosiona
Read the operating instructions for the charger forfurther information about the charging procedure.Lithium-ion battery packs are ready to use at any
7.1.2 Changing insert tools with the SIW 14-Aand SIW 18-A 4NOTEThe power tool is equipped with two different chucks:{/ೣ" square drive with ball-n
8. Care and maintenanceCAUTIONBefore beginning cleaning, remove the battery fromthe power tool in order to prevent unintentionalstarting.8.1 Care of i
9. TroubleshootingFault Possible cause RemedyThe power tool doesn’t run.The battery is discharged or fittedincorrectly.The battery must be heard to en
깻깹깺깺깸깾꺁꺁 꺀꺀깽꺂깼% $K % $K % $K % $K% $K꺁 꺁깿 깿1
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. Thematerials must be correctly separated before the
Hilti CorporationLI-9494 SchaanTel.: +423 / 234 21 11Fax: +423 / 234 29 65www.hilti.com*2012668*2012668Hilti = registered trademark of Hilti Corp., Sc
SD4500-A18Operating instructions enMode d’emploi frManual de instrucciones esManual de instruções pt
1247+≠358+“69+±+#1This Product is CertifiedCe produit est homologuéProducto homologado porEste produto está registradoCUS
23 451326
71/228910
ORIGINAL OPERATING INSTRUCTIONSSD 4500‑A18 Drywall screwdriverIt is essential that the operating instructionsare read before the power tool is operate
Obligation signsWear eyeprotectionWearprotectiveglovesSymbolsRead theoperatinginstructionsbefore useReturn wastematerial forrecycling.Volts Direct cur
2.2 Main applicationsApplication Screw typeDrywall board to metal track (framing) ≦ 0.88 mm / 20 gaDrywall screw with needle point,type S‑DS01Drywall
ETL listed to US and Canadian safety standardsHomologué ETL (conforme aux normes de sécurité américaines etcanadiennes)Producto homologado según norma
1 Bit holder1 Operating instructions2.9 Li‑ion battery charge statusLEDs light constantly LEDs blink Charge status CLED 1,2,3,4-C ≧ 75 %LED 1,2,3-50 %
Battery B 18/2.6 Li-ionWeight 0.8 kg (1.8 lb)Temperature monitoring YesType of cellLithium-ionNo. of cells125. Spare partsDepth gaugeS-DG-D 11 x 50406
c) Prevent unintentional starting. Ensure the switchis in the off‐position before connecting to powersource and/or battery pack, picking up or carryin
e) Avoid touching rotating parts. Switch the powertool on only after bringing it into position atthe workpiece. Touching rotating parts, especiallyrot
6.2.5 Work areaEnsure that the workplace is well ventilated. Ex-posure to dust at a poorly ventilated workplace mayresult in damage to the health.6.2.
8. OperationCAUTIONWear protective gloves when changing insert toolsas the insert tools get hot during use.CAUTIONWorking on the material may cause it
8.7.2 Switching off after sustained operationPress the control switch. The lockbutton returns toits original position.8.8 Power tool / depth gauge int
Never operate the power tool when the ventilationslots are blocked. Clean the ventilation slots carefullyusing a dry brush. Do not permit foreign obje
RBRCRECYCLE 1.800.822.8837Fault Possible cause RemedyRunning speed suddenlydrops considerably.The battery is discharged.Change the battery and recharg
12. Manufacturer’s warranty - toolsHilti warrants that the tool supplied is free of defectsin material and workmanship. This warranty is validso long
*400172*400172Hilti CorporationLI-9494 SchaanTel.:+423/2342111Fax: +423/2342965www.hilti.comHilti = registered trademark of Hilti Corp., Schaan W 36
14.4 Volt Li-Ion1.6 Ah14.4 Volt Li-Ion1.6 Ah76
ORIGINAL OPERATING INSTRUCTIONSSID 14ತA / SID 18ತತA / SIW 14ತA / SIW 18ತAcordless impact driver/wrenchIt is essential that the operating instruc-tions
RPMObligation signsWear eyeprotectionWear a hardhatWear earprotectionWearprotectiveglovesWearbreathingprotectionSymbolsRead theoperatinginstructionsbe
Comments to this Manuals