Hilti 3497777 Use and Care Manual

SD4500-A18Operating instructions enMode d’emploi frManual de instrucciones esManual de instruções pt

Battery B 18/2.6 Li-ionWeight 0.8 kg (1.8 lb)Temperature monitoring YesType of cellLithium-ionNo. of cells125. Spare partsDepth gaugeS-DG-D 11 x 50406

c) Prevent unintentional starting. Ensure the switchis in the off‐position before connecting to powersource and/or battery pack, picking up or carryin

e) Avoid touching rotating parts. Switch the powertool on only after bringing it into position atthe workpiece. Touching rotating parts, especiallyrot

6.2.5 Work areaEnsure that the workplace is well ventilated. Ex-posure to dust at a poorly ventilated workplace mayresult in damage to the health.6.2.

8. OperationCAUTIONWear protective gloves when changing insert toolsas the insert tools get hot during use.CAUTIONWorking on the material may cause it

8.7.2 Switching off after sustained operationPress the control switch. The lockbutton returns toits original position.8.8 Power tool / depth gauge int

Never operate the power tool when the ventilationslots are blocked. Clean the ventilation slots carefullyusing a dry brush. Do not permit foreign obje

RBRCRECYCLE 1.800.822.8837Fault Possible cause RemedyRunning speed suddenlydrops considerably.The battery is discharged.Change the battery and recharg

12. Manufacturer’s warranty - toolsHilti warrants that the tool supplied is free of defectsin material and workmanship. This warranty is validso long

*400172*400172Hilti CorporationLI-9494 SchaanTel.:+423/2342111Fax: +423/2342965www.hilti.comHilti = registered trademark of Hilti Corp., Schaan W 36

1247+≠358+“69+±+#1This Product is CertifiedCe produit est homologuéProducto homologado porEste produto está registradoCUS

23 451326

71/228910

2311

ORIGINAL OPERATING INSTRUCTIONSSD 4500‑A18 Drywall screwdriverIt is essential that the operating instructionsare read before the power tool is operate

Obligation signsWear eyeprotectionWearprotectiveglovesSymbolsRead theoperatinginstructionsbefore useReturn wastematerial forrecycling.Volts Direct cur

2.2 Main applicationsApplication Screw typeDrywall board to metal track (framing) ≦ 0.88 mm / 20 gaDrywall screw with needle point,type S‑DS01Drywall

1 Bit holder1 Operating instructions2.9 Li‑ion battery charge statusLEDs light constantly LEDs blink Charge status CLED 1,2,3,4-C ≧ 75 %LED 1,2,3-50 %