Hilti TE3000-AVR User Manual download pdf (Page 10)

2.12 Using extension cords outdoors

When working outdoors, use only extension cords that are approved and correspondingly marked for this

application.

2.13 Using a generator or transformer

This power tool may be powered by a generator or transformer when the following conditions are fulfilled:

The unit must provide a power output in watts of at least twice the value printed on the type identification

plate on the power tool. The operating voltage must remain within +5% and -15% of the rated voltage at all

times, frequency must be in the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped

with automatic voltage regulation and starting boost. Generators with an inadequate power rating may cause

damage to the power tool.

Never operate other power tools or appliances from the generator or transformer at the same time. Switching

other power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in

damage to the power tool.

In addition, the power tool may not start or may cut out (no LED indication) if the electric supply is not within

specifications (see “Troubleshooting” section).

3. Accessories, consumables

TPS Theft Protection System with Company Card,

Company Remote and TPS‑K key (optional)

Use the Hilti chisels or other tools listed below. With these you will achieve higher performance and

longer lifetime as the power tool and chisels have been optimized as a system.

Designation Width (mm) Length (mm)

Width in

inches

Length in

inches

Pointed chisels TE‑H28P

SM 40

400 16

TE‑H28P

SM 50

500 20

Flat chisels TE‑H28P

FM 40

38 400 1¹⁄₂ 16

TE‑H28P

FM 50

38 500 1¹⁄₂ 20

Wide-flat chisels

TE‑H28P

SPM 8/40

80 400 3¹⁄₈ 16

TE‑H28P

SPM 8/50

80 500 3¹⁄₈ 20

Asphalt chisel TE‑H28P

SPMA 45

125 450 5 18

Pointed flat chisel

TE‑H28P

SPI 50

115 500 4¹⁄₂ 20

Shank TE‑H28 SS 40

400 16

Tamping plate

TE STP

150x150

150x150 6x6

TE STP

200x200

200x200 8x8

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Comments to this Manuals

No comments

Hilti TE3000-AVR User Manual Page 10

Comments to this Manuals

Related products and manuals for Power tools Hilti TE3000-AVR