WSR 18-AOperating instructions enMode d’emploi frManual de instrucciones esManual de instruções pt
tions for future reference. The term “power tool”in the warnings refers to your mains-operated(corded) power tool or battery-operated (cord-less) powe
power tool’s operation. If damaged, have thepower tool repaired before use. Many accidentsare caused by poorly maintained power tools.f) Keep cutting
eyes, or to remain on your skin may promoteabsorption of harmful chemicals.6.2.2 Power tool use and carea) Secure the workpiece. Use clamps or a vicet
6.2.6 Work area safetyEnsure that the workplace is well ventilated. Ex-posure to dust at a poorly ventilated workplace mayresult in damage to the heal
7.3 Charging the batteryDANGERUse only the Hilti batteries and Hilti chargers listedunder “Accessories”.7.3.1 Charging a new battery for the first tim
oak and/or beech wood dust, particularly in conjunc-tion with additional substances used for the treatmentof wood (chromate, wood preservatives).CAUTI
9. Care and maintenanceCAUTIONBefore beginning cleaning, remove the battery fromthe power tool in order to prevent unintentionalstarting.9.1 Care and
6. Push the rectangular plastic part back into itsoriginal position.7. Grease the AVR contact shoe lightly and insert itfully in the guides.8. Check t
RECYCLERBRCLilon1.800.822.8837BatteriesHilti Li-ion batteries contain lithium-ion cells.Both you and Hilti bear responsibility for the recycling of wo
*408058*408058Hilti CorporationLI-9494 SchaanTel.:+423/2342111Fax: +423/2342965www.hilti.comHilti = registered trademark of Hilti Corp., Schaan W 36
1
TE 4-A18Operating instructions enMode d’emploi frManual de instrucciones es
1This Product is CertifiedCe produit est certifiéEste producto esta certificadoEste produto está certificadoCUS
2 3456
78910 11
ORIGINAL OPERATING INSTRUCTIONSTE 4ತA18 Cordless rotary hammerIt is essential that the operating instructionsare read before the power tool is operate
Obligation signsWear eyeprotectionWear a hardhatWear earprotectionWearprotectiveglovesWearbreathingprotectionSymbolsRead theoperatinginstructionsbefor
Modification of the power tool or tampering with its parts is not permissible.Do not use the battery as a power source for other unspecified appliance
2.10 Liತion battery charge statusLEDs light constantly LEDs blink Charge status CLED 1,2,3,4-C ฺ 75 %LED 1,2,3-50 % ู C < 75 %LED 1,2-25 % ู C <
Battery B 18/2.6 Li-ionRated voltage 21.6 VCapacity2.6 AhEnergy capacity 56.16 WhWeight 0.78 kg (1.72 lb)Type of cellLiತionTemperature monitoringNTCDe
2 35647
the switch or energising power tools that have theswitch on invites accidents.d) Remove any adjusting key or wrench beforeturning the power tool on. A
f) Improve the blood circulation in your fingers byrelaxing your hands and exercising your fingersduring breaks between working.g) Avoid touching rota
5.2.5 Work area safetya) Ensure that the workplace is well lit.b) Ensure that the workplace is well ventilated.Exposure to dust at a poorly ventilated
2. Pull the battery out of the power tool toward therear.6.5 Fitting the side handle 41. Set the forward / reverse switch to the middleposition or rem
CAUTIONThe work generates noise. Wear ear protectors.Exposure to noise can cause hearing loss.7.2.1 Working at low temperaturesNOTEThe hammering mecha
8. Care and maintenanceCAUTIONBefore beginning cleaning, remove the battery fromthe power tool in order to prevent unintentionalstarting.8.1 Care of i
8.6 Checking the power tool after care andmaintenanceAfter carrying out care and maintenance work onthe power tool, check that all protective and safe
Fault Possible cause RemedyThe battery runs down morequickly than usual.Battery condition is not optimal. Have battery condition diagnosedby Hilti Ser
11. Manufacturer’s warranty - toolsHilti warrants that the tool supplied is free of defectsin material and workmanship. This warranty is validso long
*409097*409097Hilti CorporationLI-9494 SchaanTel.: +423 / 234 21 11Fax: +423 / 234 29 65www.hilti.comHilti = registered trademark of Hilti Corp., Scha
8910
12 45311
ORIGINAL OPERATING INSTRUCTIONSWSR 18‑A cordless reciprocating sawIt is essential that the operating instruc-tions are read before the power tool is o
Obligation signsWear eyeprotectionWear a hardhatWear earprotectionWearprotectiveglovesWearbreathingprotectionSymbolsVolts Direct current Strokes permi
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,authorized personnel. This personnel must
4. AccessoriesSaw bladeswith ½" connection endCharger for Li-ion batteries C 4/36, C 4/36‑ACS orC 4/36‑ACS TPSBattery B 18/2.6 Li‑ionBattery B 18
Comments to this Manuals