Hilti TE 2-S Operations Instructions download pdf (Page 12)

is integrated in the side handle, which can be pivoted

and locked in position. Release the side handle (turn

counter -clockwise), set the depth gauge to the desired

drilling depth and tighten the side handle (turn clock-

wise) .

Forwards / reverse rotation

For screwdriving, the desired direction of rotation can

be selected simply by moving the switch .

For forwards rotation, select position ( ) and for rever-

se rotation, select position ( ).

When the tool is operated in reverse rotation, the func-

tion selection switch  should be engaged in the posi-

tion for drilling without hammering action ( / 1st gear).

For drilling, always ensure that forwards rotation

( ) is selected.

Care and maintenance

Unplug the supply cord.

Care of insert tools

Remove any dirt adhering to the surface of the insert

tools and protect them from corrosion by rubbing them

with an oily cloth from time to time.

Care of the tool

CAUTION

Keep the power tool, especially its grip surfaces, clean

and free from oil and grease. Do not use cleaning agents

which contain silicone.

The outer casing of the power tool is made from impact-

resistant plastic. Sections of the grip are made from a

synthetic rubber material.

Never operate the power tool when the ventilation slots

are blocked. Clean the ventilation slots carefully using a

dry brush. Do not permit foreign objects to enter the inte-

rior of the power tool. Clean the outside of the power tool

at regular intervals with a slightly damp cloth. Do not use

a spray, steam pressure cleaning equipment or running

water for cleaning. This may negatively affect the elec-

trical safety of the power tool.

Maintenance

Check all external parts of the tool for damage at regular

intervals and check that all controls operate faultlessly .

Do not operate the tool when parts are damaged or when

the controls do not operate faultlessly . If necessary , have

the tool repaired at a Hilti service centre.

Electrical parts of the tool may be repaired only by trained

electrical specialists.

Checking the tool after care and maintenance

After all care and maintenance work, the tool must be

checked to ensure that all safety equipment is fitted and

that it operates faultlessly .

Information for possible Serviceadresses can be

obtained at our Headquarter for North America.

Hilti Inc.

5400 South 122

East Ave.

US - Tulsa, OK 74146

U. S. A.

Tel. +1-800-879-8000

Accessories

Use only insert tools with TE-C connection end or straight

shank bits with quick release chuck or adaptor .

Hilti power tools have been designed to work opti-

mally as a system together with Hilti insert tools.

Accordingly, highest performance and longest life

expectancy can be achieved when you use this pow-

er tool with Hilti insert tools. A comprehensive pro-

gram of insert tools and accessories is available for the

TE-C system . Details of the entire programme can

be found in the current Hilti product catalogue.

Should you require insert tools not included in the stan-

dard programme, please contact the Hilti customer ser-

vice department or your Hilti sales representative. Hilti

offers a comprehensive range of special insert tools in

professional quality.

Check your insert tools at regular intervals and replace

them in good time. A damaged or badly worn connec-

tion end may result in damage to the power tool. Drill

bits with chipped or broken carbide tips may no longer

drill holes of the specified diameter, thus influencing

their suitability for anchor fastenings.

Please observe the instructions on care and mainte-

nance of your insert tools given in the following section.

Dust removal (TE DRS-S) 

A DRS extraction head can be attached to the side han-

dle / depth gauge. An industrial vacuum cleaner is used

to remove drilling dust and fragments.

Manufacturer's warranty – tools

Hilti warrants that the tool supplied is free of defects in

material and workmanship. This warranty is valid so

long as the tool is operated and handled correctly , cleaned

and serviced properly and in accordance with the Hilti

Operating Instructions, and the technical system is main-

tained. This means that only original Hilti consumables,

components and spare parts may be used in the tool.

Printed: 07.07.2013 | Doc-Nr: PUB / 5070816 / 000 / 00

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Comments to this Manuals

No comments

Hilti TE 2-S Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Rotary hammers Hilti TE 2-S