Hilti 3493740 Use and Care Manual download pdf (Page 5)

Obligation signs

Wear eye

protection

Wear a hard

hat

Wear ear

protection

Wear

protective

gloves

Wear

breathing

protection

Symbols

Read the

operating

instructions

before use

Return waste

material for

recycling.

Drilling

without

hammering

Hammer

drilling

Chiseling Chisel position

adjustment

Volts Amps

Watts Alternating

current

Hertz Rated speed

under no load

Revolutions

per minute

Diameter Double

insulated

Equipped with

theft

protection

system

Lock symbol

Location of identification data on the power tool

The type designation can be found on the type iden-

tification plate and the serial number on the side of

the motor housing. Make a note of this data in your

operating instructions and always refer to it when

making an enquiry to your Hilti representative or

service department.

Type:

Generation: 02

Serial no.:

2. Description

2.1 Use of the product as directed

The power tool is an electrically-powered combihammer with pneumatic hammering mechanism. The ATC

(Active Torque Control) function of the TE 60-ATC / TE 60T‑ATC provides greater operating comfort while

drilling.

The tool is designed for drilling in concrete, masonry, metal and wood and can also be used for chiseling.

The power tool is equipped with electronic overload protection. If the power tool is overloaded for a continuous

period, motor speed will be reduced automatically and, if necessary, the motor may be stopped completely.

When the control switch is released and then pressed again, the motor immediately regains full power. When

restarting, care should thus be taken to ensure that the power tool is held securely with both hands.

Under certain conditions, the power tool is suitable for use for mixing (see “Tools, accessories” and

“Operation”).

The power tool is designed for professional use and may be operated, serviced and maintained only by trained,

authorized personnel. This personnel must be informed of any special hazards that may be encountered. The

power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or

when used not as directed.

1 2 3 4 5 6 7 8 9 10 ... 18 19

Comments to this Manuals

No comments

Hilti 3493740 Use and Care Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Hilti 3493740