Hilti 3493740 Use and Care Manual download pdf (Page 7)

Reduced (50%) power indicator (see section “Operation / hammer drilling / chiseling”)

2.10 Items supplied as standard

1 Power tool with side handle

1 Depth gauge

1 Grease

1 Cleaning cloth

1 Operating instructions

1 Hilti toolbox

2.11 Using extension cords

Use only extension cords of a type approved for the application and with conductors of adequate cross section.

The power tool may otherwise lose performance and the extension cord may overheat. Check the extension

cord for damage at regular intervals. Replace damaged extension cords.

Recommended minimum conductor cross section and max. cable lengths

Conductor cross section 1.5 mm² 2mm² 2.5 mm² 3.5 mm²

Mains voltage 100V 30 m 50 m

Mains voltage 110-120 V 20 m 30 m 40 m

Mains voltage 220-240 V 30 m 75 m

Do not use extension cords with 1.25 mm² conductor cross section.

2.12 Using extension cords outdoors

When working outdoors, use only extension cords that are approved and correspondingly marked for this

application.

2.13 Using a generator or transformer

This power tool may be powered by a generator or transformer when the following conditions are fulfilled:

The unit must provide a power output in watts of at least twice the value printed on the type identification

plate on the power tool. The operating voltage must remain within +5% and -15% of the rated voltage at all

times, frequency must be in the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with

automatic voltage regulation and starting boost.

Never operate other power tools or appliances from the generator or transformer at the same time. Switching

other power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in

damage to the power tool.

3. Insert tools, accessories

Hammer drill bits

TE 60 / TE 60‑ATC

Ø 12…40 mm

Hammer drill bits

TE 60T / TE 60T‑ATC

Ø 6…32 mm

Breach bits

TE 60 / TE 60‑ATC

Ø 40…66 mm

Breach bits

TE 60T / TE 60T‑ATC

Ø 40 mm

Percussion core bits

TE 60 / TE 60‑ATC

Ø 45…90 mm

Percussion core bits

TE 60T / TE 60T‑ATC

Ø 50…90 mm

PCM diamond core bits TE 60‑ATC / TE 60T‑ATC

Ø 42…82 mm

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Comments to this Manuals

No comments

Hilti 3493740 Use and Care Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Hilti 3493740