Hilti 3490197 Use and Care Manual download pdf (Page 8)

Power tool SCM 18‑A

Dimensions (L x W x H) 370 mm (14.57") x 206 mm (8.11") x 242 mm

(9.53")

Base plate dimensions 248 mm (9.76") x 127 mm (5")

Specified blade diameter

160…165 mm (6.3…6.5")

Saw blade disc thickness

1.2 mm (0.05")

Kerf width

1.6 mm (0.06")

Saw blade arbor size

20 mm (0.79")

Cutting depth

57 mm (2.24")

Speed under no load

3,500/min

Battery B 18/3.3 Li‑ion B 18/2.6 Li‑ion

Rated voltage 21.6 V 21.6 V

Capacity

3.3 Ah 2.6 Ah

Energy capacity 71.28 Wh 56.16 Wh

Weight 0.78 kg (1.72 lb) 0.78 kg (1.72 lb)

Type of cell

Li‑Ion Li‑Ion

No. of cells

12 12

Deep discharge protection Yes Yes

5. Safety instructions

NOTE

The safety rules in section 5.1 contain all general

safety rules for power tools which, in accordance

with the applicable standards, must be listed in the

operating instructions.Accordingly, some of the rules

listed may not be relevant to this tool.

5.1 General power tool safety warnings

WARNING

Read all safety warnings and instructions. Fail-

ure to follow the warnings and instructions may

result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference. The term “power tool” in the warnings

refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

5.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedrisk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Comments to this Manuals

No comments

Hilti 3490197 Use and Care Manual Page 8

Comments to this Manuals

Related products and manuals for Power tools Hilti 3490197